secureIT™ - library security systems

D-Tech’s system provides perimeter based protection and improves alarm handling capability for libraries where enhanced protection is required with a concern for the aesthetic.

Packaged in a durable Plexiglas frame with attractive stainless steel base, the system combines an obvious deterrent with a stylish design.

Download product info sheet  Enquire about this product

Features

  • Compatible with D-Tech 13.56 MHz RFID labels and items tagged with approved labels from book suppliers including multi vendor reading (MVR). Allowing reading of other RFID labels.
  • D-Tech’s advanced digital RFID technology uses state of the art, digitally enhanced receiver to chip technology to ensure superior detection with false alarm free protection.
  • Integrated alarm lights and sounder provide individual aisle identification through multiplexing.
  • GateViewer software application collates and identifes all alarm incidents, with connection and troubleshooting status to installed system. (RFID version only) .
  • Mounts as a free standing unit or on a standard ramp.
  • Alarm output to recording equipment and/or voice alarms available.
  • Integrated lights illuminate system for the visually impaired and to indicate that the system is on and working.
  • Optional integrated people counter.

Specifications

Height: Electronic: 95mm Antenna: 1750mm LR200 Reader: 330mm Multiplexer MUX: 90mm
Width: Electronic: 110mm Antenna: 110mm LR200 Reader: 180mm Multiplexer MUX: 110mm
Length: Electronic:180mm Antenna: 495mm  LR200 Reader: 120mm Multiplexer MUX: 182mm
Weight: Electronic:1.7kg    Antenna: 22.5kg   LR200 Reader: 2.4kg    Multiplexer MUX: 550g
Materials: Transparent acrylic panel for the frame and lower base is stainless steel.
Power Supply: 110/240 Vac
One per electronic– dedicated clean earthed power required.
One per light unit– same adjacent to above unit 13 amp fused spur with a Gex outlet.
Electronics: LR2000 (Feig) – Tagsys multiplexer for larger aisle
Configurations. Light regulator and power unit.
Performance: 120 cm
Installation Requirements:
  • 1 x single aisle system requires two transceiver antennas and one LR2000
    RFID power supply and splitter unit.
  • Adjustable footplate included in package for Goor 4xing and levelling. Conduit provision
    needs to be provided.
AFI/EFS: Recommended AFI mode supported for GateViewer but EAS bit is also supported.
Software:

D-Tech’s  antenna system provides perimeter based protection and improves alarm handling capability for libraries where high cost antenna systems are not appropriate or where cost effective solutions are required.

Designed with a durable metal frame with simple and modern styling, the  system provides a budget friendly deterrent without compromising functionality or quality.

Download product info sheet  Enquire about this product

Features

  • Compatible with D-Tech 13.56 MHz RFID labels and items tagged with approved labels from book suppliers including multi vendor reading (MVR). Allowing reading of other RFID labels.
  • D-Tech’s advanced digital RFID technology uses state of the art, digitally enhanced receiver to chip technology to ensure superior detection with false alarm free protection.
  • Integrated alarm lights and sounder provide individual aisle identification through multiplexing.
  • software application collates and identifies all alarm incidents, with connection and troubleshooting status to installed system. (RFID version only) .
  • Mounts as a free standing unit or on a standard ramp.
  • Alarm output to recording equipment and/or voice alarms available.
  • Optional custom colours.
  • Optional integrated people counter.

Specifications

Height: Electronic: 35mm   Antenna: 1830mm
Width: Electronic: 165mm Antenna: 80mm
Lenth: Electronic: 230mm Antenna: 460mm
Weight: Electronic: 0.85kg  Antenna: 19kg
Materials: Steel
Alternative RAL colours can be requested at an additional cost. (Click on chart below)
RAL_colourchart
Power Supply: 110/240 Vac
Electronics: LR2000 (Feig) – Tagsys multiplexer for larger aisle con1gurations
Performance: 120 cm
Installation Requirements:
  • 1 x single aisle system requires two antennas and one electronic power supply
  • 1x 13amp spur/socket (depending upon location) per electronics.
AFI/EFS: Recommended AFI mode supported for viewIT™ software but EAS bit is also supported..
Software:  

D-Tech’s secureIT™ F-Series antenna system provides RF perimeter based protection and improves alarm handling capability for libraries where high cost antenna systems are not appropriate or where cost effective solutions are required.

Designed with a durable metal frame with simple and modern styling, the F-Series system provides a budget friendly deterrent

 

Download product sheet (UK) Download product sheet (US) Enquire about this product

Features

  • Compatible with 10.5 / 10.0 / 9.5 / 8.5 MHz RF labels and items tagged with
    approved labels from book suppliers.
    D-Tech’s advanced digital RF technology uses state of the art, digitally
    enhanced receiver to chip technology to ensure superior detection.
  • Integrated alarm lights and sounder
  • Mounts as a free standing unit or on a standard ramp.
  • Alarm output to recording equipment and/or voice alarms available.
  • Optional custom colours.
  • Optional integrated people counter.

Specifications

Height: Electronic: 1.3″ (35mm)   Antenna: 72.0″ (1830mm)
Width: Electronic: 6.5″ (165mm) Antenna: 3.1″ (80mm)
Lenth: Electronic: 9.0″ (230mm) Antenna: 18.1″ (460mm)
Weight: Electronic: 0.85kg  Antenna: 19kg
Materials: Steel
Alternative RAL colours can be requested at an additional cost. (Click on chart below)
RAL_colourchart
Power Supply: 110/240 Vac
Electronics: LR2000 (Feig) – Tagsys multiplexer for larger aisle con1gurations
Performance: 2×2 label 63” (160 cm) max
Installation Requirements:
  • 1 x single aisle system requires two antennas and one electronic power supply
  • 1x 13amp spur/socket (depending upon location) per electronics.